Stimulation / Corrosion Inhibitors

Corrosion inhibitors, as their name suggests, prevent acid damage to equipment both on the surface and in the well. The initial cost of corrosion inhibitors may seem to be very high, in fact the single most expensive component of the materials used, but the cost of damage to pumping equipment and tubulars if they were not used would be even higher

View Corrosion inhibitors Informations Sheets
SAI-04 is designed to protect steelwork from the action of acids in treating oil wells at low to moderate bottom hole temperatures.	SAI-04
SAI-05A is an organic corrosion inhibitor for use in HCl acid and is dispersible in all concentrations of the acid. It will inhibit corrosion in 28% HCL up to 300°F and in 15% HCL up to 400°F.	SAI-05A
SAI-36 is a blend of quaternary ammonium compounds with acetylenic alcohols that provides corrosion protection against hydrochloric acid up to 28% concentration.	SAI-36
SAI-40 is effective in hydrochloric acid of concentrations up to 28%. SAI-40 is effective up to 250F but this can be extended with the use of intensifiers to 350F.	SAI-40