Stimulation / Emulsion Contol

Demulsifiers / Non-Emulsifiers / Anti-Sludge Agents
During fracturing and matrix acidising the acid often comes into direct contact with produced crude oil and well fluids, this can result in the formation of an emulsion or sludge. Emulsions can be viscous and can block the treated formation. Non-emulsifiers and anti-sludge agents can be used to prevent these emulsion forming and demulsifiers can be used to break a formed emulsion.

View Emulsion Contol Informations Sheets
SNE-05 is a strong cationic non-emulsifier for acids that has shown good activity on a variety of crude samples.	SNE-05
SNE-06 non-emulsifier is a blend of non-ionic surface active agents formulated to prevent the occurrence of emulsions of aqueous stimulation fluids in crude oil.	SNE-06
SNE-07 non-emulsifier is a synergistic complex of non-ionic surface active agents and anti-oxides formulated to prevent the occurrence of emulsions of aqueous stimulation fluids in crude oil.	SNE-07
SNE-33 is a strong cationic non-emulsifier for acids that has shown good activity on a variety of crude samples.	SNE-33
SS-19 non-emulsifier is an oil-based, water dispersible, strongly anionic surfactant.	SS-19
SS-20 and SS-21 are surfactant blends which are added to acids to help prevent the formation of sludge and emulsions during acidising treatments.	SS-20/21
SS-200 is a unique blend of surface active agents specifically designed to impart low surface tension and to treat and/or prevent acid-oil emulsions which commonly occur during well stimulation operations.	SS-200
SS-22 anti-sludge agent and non-emulsifier is a good general product for a wide variety of crudes, including asphaltic oils.	SS-22
SS-24 is a surfactant blend which is added to acids to help prevent the formation of sludge and emulsions during acidising treatments. Insoluble sludge deposits are formed by some crude oils when contacted with acid, and partial or even complete plugging of a producing zone may occur.	SS-24
SS-43 is a very effective blend of oil soluble surfactants that has been shown to break water blocks and remove crude oil emulsions.	SS-43
SS-52 is a non-ionic product which is added to acids to help prevent the formation of sludge during acidising treatments.	SS-52